Expert Heating Services
For Homes And Businesses

Heating Services in Omaha, NE

From furnace maintenance and emergency repairs to full system replacements and heat pump service — Midlands Heating & Air provides complete residential and commercial heating services across Omaha. Licensed technicians, honest pricing, and 24/7 emergency response.

Call 402.769.8234

Request An Estimate

Schedule Your Furnace
Tune-Up

Book your fall furnace inspection before Omaha’s cold season hits. September and October appointments fill up fast — don’t wait until your furnace stops working.

Call 402.769.8234

Request Online

Tune-Up Plans Available

Basic Plan
$199/year
(2 tune-ups)

Standard Plan
$350/year
(Priority service)

Premium Plan
$540/year
(4 visits/year)

View Service Plans 

Furnace Maintenance & Tune-Up in Omaha

Annual furnace maintenance is the single most effective thing an Omaha homeowner can do to avoid mid-winter breakdowns. Nebraska’s heating season runs from October through April — six consecutive months where your furnace has to perform. A system that skips annual service heading into that stretch is running on borrowed time.

Our comprehensive furnace tune-up goes well beyond a quick visual check. Midlands technicians work through a detailed inspection protocol that covers every major system component — cleaning where needed, testing safety controls, measuring gas pressure and combustion efficiency, and documenting anything that needs attention. Every visit concludes with a written service report left with the homeowner.

What’s Included in a Midlands Furnace Tune-Up
Heat exchanger inspection – checked for cracks or stress fractures that can allow carbon monoxide into living spaces

Burner cleaning and testing – ensures clean, complete combustion and proper flame characteristics

Gas pressure verification – measured and adjusted to manufacturer specifications

Ignitor and flame sensor testing – the two most common causes of furnace failure; identified before they cause a breakdown

Blower motor and belt inspection – checks for wear, proper tension, and correct airflow output

Flue and venting inspection – verified clear of blockages with no backdraft or venting issues

Safety limit and pressure switch testing – confirms all safety shutoffs function correctly

Filter inspection and replacement – standard filter replaced; recommendations for upgraded filtration if appropriate

Carbon monoxide check at registers – ensures no combustion gases are entering the living space

Thermostat calibration and function test – verifies accurate temperature sensing and system response

Most manufacturers require documented annual professional maintenance to keep furnace warranties valid. A Midlands tune-up provides the service record that warranty claims require — protecting your investment at the same time it protects your family.

We recommend scheduling your annual furnace tune-up every September or October — before Omaha’s cold weather arrives and while appointment availability is still flexible. Omaha HVAC companies get busy fast once the first cold front hits.

Furnace Repair in Omaha
Fast, Accurate, Honest

When a furnace stops working in Omaha’s winter, every hour without heat matters. Midlands Heating & Air prioritizes furnace repair calls — dispatching licensed technicians with stocked service vehicles to diagnose and resolve the problem as fast as possible. In most cases, we carry the parts most likely needed for the most common furnace failures, which means a single visit resolves the issue completely.

Our technicians are trained and experienced on all major gas furnace brands including Carrier, Trane, Lennox, Goodman, Rheem, York, Bryant, American Standard, and more. We approach every repair with an accurate diagnosis first — never recommending unnecessary parts or a full replacement when a targeted repair is the right answer.

Common Furnace Repairs We Perform in Omaha

Ignitor replacement — the most common furnace repair; a failed hot surface ignitor prevents the furnace from lighting

Flame sensor cleaning or replacement — a dirty or failed flame sensor causes the furnace to ignite briefly, then shut off

Heat exchanger repair or condemnation — cracked heat exchangers are a carbon monoxide safety hazard; we inspect and report honestly

Inducer motor replacement — a failed inducer prevents proper venting and triggers safety lockout

Blower motor replacement — furnace runs but no air moves through the ductwork

Control board replacement — the furnace’s brain stops communicating with operational components

Gas valve replacement — prevents gas from reaching the burners; furnace won’t ignite

Limit switch replacement — triggers when the furnace overheats; often caused by restricted airflow

Pressure switch replacement — a failed pressure switch causes furnace lockout without proper venting confirmation

Capacitor and motor replacement — failed capacitors prevent blower motors from starting correctly

For heating season emergency repairs, call our 24/7 line at 402.769.8234. For non-emergency repairs and tune-ups, we offer flexible scheduling throughout the week and Saturdays by appointment.

Signs Your Furnace Needs Repair

• Furnace won’t turn on or won’t stay on
• Blowing cold or lukewarm air only
• Unusual noises — banging, rattling, squealing, or booming
• Furnace short-cycling (turns on and off rapidly)
• Yellow or orange burner flame instead of blue
• Rising energy bills without increased usage
• Uneven heating — some rooms significantly colder than others
• Burning smell when the furnace first runs
• Thermostat doesn’t respond to temperature changes
• CO alarm has activated near the furnace

Carbon monoxide concern?
If your CO alarm has activated or you smell gas near your furnace, evacuate immediately and call 911 — then call Midlands at 402.769.8234.

Call for Furnace Repair Now

New Furnace Installation

from $3,500

Installed price varies by system size, brand & installation requirements.

Every Installation Includes

• Free in-home estimate
• Manual J load calculation
• Permit-compliant installation
• Full system startup and testing
• Thermostat setup and training
• Manufacturer warranty registration

Get a Free Estimate

Request Online

All major brands
Carrier · Lennox · Trane · Goodman & more

Furnace Replacement & Installation in Omaha

Even a well-maintained furnace has a finite service life. Most gas furnaces are designed for 15–20 years of reliable operation. Once a system reaches that age — especially if it’s facing a significant repair — replacement is typically the smarter financial and practical decision. A new high-efficiency furnace delivers better comfort, lower monthly energy costs, improved safety features, and the peace of mind that comes with a full manufacturer warranty.

Midlands Heating & Air installs furnaces from all major manufacturers. Our technicians perform a proper Manual J load calculation before recommending any new system — ensuring the replacement unit is correctly sized for your home’s square footage, insulation levels, and ductwork. An oversized furnace short-cycles and creates humidity problems. An undersized one runs constantly without reaching set-point. Correct sizing is fundamental, and we don’t skip it.

When to Replace Instead of Repair

• Furnace is 15 or more years old and facing a significant repair cost
• Repair estimate exceeds 50% of replacement cost
• Heat exchanger is cracked or condemned replacement is the only safe option
• System is repeatedly failing with increasing frequency
• Energy bills have been climbing steadily despite consistent usage
• The system cannot maintain comfortable temperatures even when running
• R-22 refrigerant system (heat pump) R-22 is no longer manufactured

High-Efficiency Furnace Upgrades

Modern high-efficiency gas furnaces achieve AFUE ratings of 95–98%, compared to 60–80% for older equipment. In practical terms, upgrading from a 70% AFUE system to a 96% AFUE system means 26% less gas burned to produce the same amount of heat — a meaningful reduction in monthly utility costs over the life of the equipment. Combined with two-stage heating, variable-speed blower motors, and improved heat exchangers, today’s furnaces are dramatically more capable than the equipment they typically replace.

Midlands offers new furnace installations starting at $3,500, with financing available for qualifying customers. We provide free in-home estimates with a full cost breakdown — no pressure, no obligation, just an accurate number before any decision is made.

Heat Pump Installation, Repair & Service in Omaha

Heat pumps are the most energy-efficient heating and cooling technology available for residential use, and adoption among Omaha homeowners has grown significantly as modern heat pump systems have become capable of handling Nebraska’s colder winters. Rather than burning fuel to generate heat, a heat pump moves thermal energy from the outdoor air into your home — a process that delivers two to three units of heat energy for every unit of electrical energy consumed.

Modern cold-climate air-source heat pumps operate efficiently down to temperatures well below zero °F, making them a genuinely viable heating solution for Omaha’s climate. Midlands Heating & Air installs, services, and repairs air-source heat pumps and ductless mini-split systems throughout the Omaha metro, and our technicians have the specialized training that heat pump service requires.

Heat Pump Services We Provide

Heat pump installation – air-source and ductless mini-split systems sized and installed correctly

Heat pump repair – reversing valve, compressor, refrigerant charge, defrost controls, and more

Seasonal maintenance – heat pumps require attention to both heating and cooling mode components

Refrigerant leak detection and repair – EPA Section 608 compliant handling

Defrost cycle diagnosis – a common heat pump issue unique to heating operation

Mini-split / ductless system service – indoor air handler cleaning, refrigerant check, controls testing

Common Heat Pump Problems We Diagnose

Heat pump blowing cold air in heating mode — often a refrigerant, reversing valve, or defrost issue

System running constantly without reaching set-point — may indicate low refrigerant or undersized equipment

Ice buildup on the outdoor unit — abnormal icing beyond the normal defrost cycle indicates a problem

Heat pump not switching between heating and cooling modes — reversing valve failure is the most common cause

Unusual noises from the outdoor unit — compressor, fan motor, or refrigerant flow issues

Heat pumps require technicians with specific training distinct from standard furnace and AC work. Midlands technicians are qualified to diagnose and repair both the heating and cooling functions of heat pump systems, including the refrigerant circuit, defrost controls, and reversing valve — components that don’t exist in conventional HVAC equipment.

Is a Heat Pump Right for Your Omaha Home?

Heat pumps are an excellent choice for many Omaha homeowners — especially those looking to reduce energy costs year-round by combining heating and cooling into one efficient system.

Good candidates include:

Homes replacing both furnace and AC simultaneously

Homeowners focused on energy efficiency and lower bills

Additions or spaces without existing ductwork (mini-splits)

All-electric homes or those reducing gas dependence

Talk to a Technician

Request a Free Estimate

Heating Brands We Service

• Carrier
• Lennox
• Trane / American Standard
• Goodman / Amana
• York / Johnson Controls
• Rheem / Ruud
• Bryant / Payne
• All other major brands

Get a Free Estimate

Qualified Heating Professionals You Can Trust

Midlands Heating & Air launched in 2015 with one goal: be the heating and cooling company that Omaha homeowners and businesses actually want to deal with. Our technicians hold current Nebraska HVAC licenses, complete ongoing manufacturer and industry training, and approach every job with the same diagnostic discipline — whether it’s a routine fall tune-up or a midnight emergency repair.

We carry full general liability insurance and workers’ compensation on every job. All furnace installations are performed to Nebraska mechanical code and EPA Section 608 refrigerant regulations. Our service records provide the documented professional maintenance history that manufacturer warranties require.

In ten years of heating service across Omaha, we’ve built our reputation one honest service call at a time. Our 4.9-star Google average across 76-plus verified reviews reflects that — and it’s the standard we hold ourselves to on every job we run.